True Geller Mod Tutorial (Redo version)

True Geller Mod by BloorA

True Geller mod is created by BloorA. Due to many newbies do not understand well the original tutorial by BloorA, I redo it into a video tutorial, hopefully it illustrates the making better and helps answer most of the frequently asked questions.

Stats
Length: 19.7~21.5cm (adjustable if add tape)
Weight: Depends on the tips you use
COG: COG=COP (without inktube)
Writing-Mechanism: Gel or ballpoint
Estimated cost: +/-RM22
___________________________________
Materials List
2x Faber Castell True Gel (which have old version caps; CX5 and CX7 are useable too)
2x Grips of choice (I use G2 grips in this tutorial)
2x Tips of choice (I use G1 tips but you can use any other tips)

Other Mod Materials & Tools
Tape (regular tape can be used but electrical tape is preferred due to its flexible in wrapping non-fitting cap and tip.)
Cutter
Stick (able to fit through pen barrel to poke backplug)
Nail Polish Remover
Pliers (Optional)
___________________________________
The Making


BGM: Porch Swing Days by Kevin MacLeod

Before customisation -.-'

After customisation ^o^

___________________________________
Q&A
Q: Can I use [...] tips? / What tip can I use?
A: Yes, you can use ANY tip. For example, you can use Pilot G-3 tips, for heavier you may use Uniball Signo metal tips, for even heavier try Pilot Nextage tips.

Q: Can I use [...] grips?
A: Yes, you can use ANY grip.

Q: I don't have nail polish remover, what else can I use?
A: Acetone if you can get, or Thinner. Otherwise, just get a cheap nail polish remover for RM2~4.

Q: Where to get nail polish remover?
A: Anywhere that could possibly sell it, especially stores that sell girls stuff like nail polish. Ask your mum or sis or gf. =P

Q: What is that yellow and gray stripes?
A: They are Anyball/Profile grip stripes. You can add other grip stripes that you have.